Within Work Package 3, CIDETEC has produced the first 3R adhesive samples for the Project. Previously, a screening has been carried out to select the resin formulation that best suits the specifications defined in Work Package 1. Now, it is time to optimize the handling and application of the adhesive film to obtain robust joints of 3R laminates.
![](https://www.airpoxy.eu/wp-content/uploads/20191212_130323_Picture-1-min-scaled.jpg)
A thin layer of adhesive is laid on the carrier
![](https://www.airpoxy.eu/wp-content/uploads/20191010_125202_Picture-3-min-scaled.jpg)
The secondary release liner is incorporated on the adhesive film
![](https://www.airpoxy.eu/wp-content/uploads/20191017_115924_Picture-2-min-scaled.jpg)
Next, the carrier impregnated with the adhesive is laid on the primary release liner
![](https://www.airpoxy.eu/wp-content/uploads/20191010_125209_Picture-4-min-scaled.jpg)
Finally the adhesive is wound